Basic electrochemical cell set up

This is a stationary solution basic electrochemical cell for measurements of electrodes in a form of:

• rod/disc (6 mm dia.)
• thin film deposited on flat substrate (using a wireclip) 
• membrane (using a wire clip)

The working, counter and reference electrodes are mounted in a top casing either in 2-, or 3-electrode setup. The cell elements are constructed with materials that are inert to the sample (glass and PEEK). It well fits aqueous(EPDM O-Rings) and organic solvent (FFKM O-Rings) electrolyte requirements.The construction is gas-tight and can be used when the removal and exclusion of contaminants such as oxygen and water is required by bubbling of an inert gas through the electrolyte.

Please note: this product is not available from Metrohm Germany.