874 Oven Sample Processor special vials

Name: 874 Oven Sample Processor special vials
Rating: 4.6 (6 reviews)

2.874.0130

874 Oven Sample Processor special vials

2.874.0130

- Heating tube stopper
- 6.1446.170
- for coulometric KF vessels in connection with heatable tubing connection
- for coulometric KF vessels in connection with heatable tubing connection
- PCS
- 1
- Drying flask cap
- 6.1602.145
- Screw cap with GL 45 thread for the 6.1608.050 drying flask.
- Screw cap with GL 45 thread for the 6.1608.050 drying flask.
- PCS
- 2
- Drying bottle / 100 mL / GL 45
- 6.1608.050
- PCS
- 2
- FEP tubing / M6 / 13 cm
- 6.1805.010
- With light and kink protection.
- With light and kink protection.
- PCS
- 2
- FEP tubing / M6 / 18 cm
- 6.1805.050
- With light and kink protection
- With light and kink protection
- PCS
- 1
- FEP tubing / M6 / 44 cm
- 6.1805.470
- With light and kink protection
- With light and kink protection
- PCS
- 1
- Thread adapter M6 outer / M8 inner
- 6.1808.040
- Outer thread M6, inner thread M8.
- Outer thread M6, inner thread M8.
- PCS
- 1
- Tubing adapter olive / M8 outer
- 6.1808.050
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- PCS
- 1
- Filter tube
- 6.1821.040
- Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.
- Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.
- PCS
- 2
- Heating tubing
- 6.1830.030
- Heating tubing with M6 thread for 860 KF Thermoprep, 885 Compact Oven Sample Processor and 874 USB Oven Sample Processor.
- Heating tubing with M6 thread for 860 KF Thermoprep, 885 Compact Oven Sample Processor and 874 USB Oven Sample Processor.
- PCS
- 1
- Clamping ring
- 6.2013.010
- For support rods with a diameter of 10 mm.
- For support rods with a diameter of 10 mm.
- PCS
- 1
- Cable clip
- 6.2053.000
- Cable clip for fastening cables and tubes
- Cable clip for fastening cables and tubes
- PCS
- 1
- Sample holder
- 6.2063.020
- Sample holder for 6 mL sample vials (6.2419.000), for 874
- Sample holder for 6 mL sample vials (6.2419.000), for 874
- PCS
- 1
- Cable USB A – mini-DIN 8-pin
- 6.2151.000
- Controller cable
- Controller cable
- PCS
- 1
- 3 mm hex key for IC Sample Processors
- 6.2621.100
- PCS
- 1
- Hexagon key 2 mm
- 6.2621.130
- 2 mm.
- 2 mm.
- PCS
- 1
- Hexagon key 2.5 mm
- 6.2621.140
- PCS
- 1
- Oven insert
- 6.2627.010
- Used with 874 USB Oven Sample Processor
- Used with 874 USB Oven Sample Processor
- PCS
- 1
- Dust filter
- 6.2724.010
- Dust filter for Rancimats and Karl Fischer ovens.
- Dust filter for Rancimats and Karl Fischer ovens.
- PCS
- 1
- Wrench
- 6.2739.000
- For tightening connectors
- For tightening connectors
- PCS
- 1
- Safety shield
- 6.2751.140
- Safety shield for 874 USB Oven Sample Processor, made of PMMA.
- Safety shield for 874 USB Oven Sample Processor, made of PMMA.
- PCS
- 1
- Molecular sieve
- 6.2811.000
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- PCS
- 1
- Septum piercing needle
- 6.2816.070
- Used with Karl Fischer ovens.
- Used with Karl Fischer ovens.
- PCS
- 1
- Outlet needle
- 6.2816.080
- Used with KF Thermoprep and Oven Sample Processor.
- Used with KF Thermoprep and Oven Sample Processor.
- PCS
- 1
- 874 Oven Sample Processor
- 1.874.0010
- The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titration. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples or those that react with the KF reagent.
- The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titration. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples or those that react with the KF reagent.
- PCS
- 1
- Heating tube stopper
- 6.1446.170
- for coulometric KF vessels in connection with heatable tubing connection
- for coulometric KF vessels in connection with heatable tubing connection
- PCS
- 1
- Drying flask cap
- 6.1602.145
- Screw cap with GL 45 thread for the 6.1608.050 drying flask.
- Screw cap with GL 45 thread for the 6.1608.050 drying flask.
- PCS
- 2
- Drying bottle / 100 mL / GL 45
- 6.1608.050
- PCS
- 2
- FEP tubing / M6 / 13 cm
- 6.1805.010
- With light and kink protection.
- With light and kink protection.
- PCS
- 2
- FEP tubing / M6 / 18 cm
- 6.1805.050
- With light and kink protection
- With light and kink protection
- PCS
- 1
- FEP tubing / M6 / 44 cm
- 6.1805.470
- With light and kink protection
- With light and kink protection
- PCS
- 1
- Thread adapter M6 outer / M8 inner
- 6.1808.040
- Outer thread M6, inner thread M8.
- Outer thread M6, inner thread M8.
- PCS
- 1
- Tubing adapter olive / M8 outer
- 6.1808.050
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- PCS
- 1
- Filter tube
- 6.1821.040
- Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.
- Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.
- PCS
- 2
- Heating tubing
- 6.1830.030
- Heating tubing with M6 thread for 860 KF Thermoprep, 885 Compact Oven Sample Processor and 874 USB Oven Sample Processor.
- Heating tubing with M6 thread for 860 KF Thermoprep, 885 Compact Oven Sample Processor and 874 USB Oven Sample Processor.
- PCS
- 1
- Clamping ring
- 6.2013.010
- For support rods with a diameter of 10 mm.
- For support rods with a diameter of 10 mm.
- PCS
- 1
- Cable clip
- 6.2053.000
- Cable clip for fastening cables and tubes
- Cable clip for fastening cables and tubes
- PCS
- 1
- Sample holder
- 6.2063.020
- Sample holder for 6 mL sample vials (6.2419.000), for 874
- Sample holder for 6 mL sample vials (6.2419.000), for 874
- PCS
- 1
- Cable USB A – mini-DIN 8-pin
- 6.2151.000
- Controller cable
- Controller cable
- PCS
- 1
- 3 mm hex key for IC Sample Processors
- 6.2621.100
- PCS
- 1
- Hexagon key 2 mm
- 6.2621.130
- 2 mm.
- 2 mm.
- PCS
- 1
- Hexagon key 2.5 mm
- 6.2621.140
- PCS
- 1
- Oven insert
- 6.2627.010
- Used with 874 USB Oven Sample Processor
- Used with 874 USB Oven Sample Processor
- PCS
- 1
- Dust filter
- 6.2724.010
- Dust filter for Rancimats and Karl Fischer ovens.
- Dust filter for Rancimats and Karl Fischer ovens.
- PCS
- 1
- Wrench
- 6.2739.000
- For tightening connectors
- For tightening connectors
- PCS
- 1
- Safety shield
- 6.2751.140
- Safety shield for 874 USB Oven Sample Processor, made of PMMA.
- Safety shield for 874 USB Oven Sample Processor, made of PMMA.
- PCS
- 1
- Molecular sieve
- 6.2811.000
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- PCS
- 1
- Septum piercing needle
- 6.2816.070
- Used with Karl Fischer ovens.
- Used with Karl Fischer ovens.
- PCS
- 1
- Outlet needle
- 6.2816.080
- Used with KF Thermoprep and Oven Sample Processor.
- Used with KF Thermoprep and Oven Sample Processor.
- PCS
- 1
- 800 Dosino
- 2.800.0010
- The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
- The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
- PCS
- 1
- 801 Stirrer
- 2.801.0010
- Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).
- Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).
- PCS
- 1
- 851 Titrando with generator electrode with diaphragm
- 2.851.0010
- Coulometer including generator electrode with diaphragm and 801 Magnetic Stirrer.Coulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary.Coulometric titrations are carried out easily and quickly with the 851 Titrando.Recommended measuring range: 10 µg - 200 mg absolute waterFor use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required
- Coulometer including generator electrode with diaphragm and 801 Magnetic Stirrer.Coulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary.Coulometric titrations are carried out easily and quickly with the 851 Titrando.Recommended measuring range: 10 µg - 200 mg absolute waterFor use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required
- PCS
- 1
- 851 Titrando with generator electrode without diaphragm
- 2.851.0110
- Coulometer including generator electrode without diaphragm.Coulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary.Coulometric titrations are carried out easily and quickly with the 851 Titrando.Recommended measuring range: 10 µg - 200 mg absolute water.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
- Coulometer including generator electrode without diaphragm.Coulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary.Coulometric titrations are carried out easily and quickly with the 851 Titrando.Recommended measuring range: 10 µg - 200 mg absolute water.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
- PCS
- 1
- 852 Titrando with generator electrode with diaphragm
- 2.852.0050
- Coulometer including generator electrode with diaphragm, 801 Magnetic Stirrer, and complete volumetric titration cell.Coulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary.Recommended coulometry measuring range: 10 µg - 200 mg absolute waterThe 852 Titrando controls not only coulometric, but also volumetric Karl Fischer titration.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
- Coulometer including generator electrode with diaphragm, 801 Magnetic Stirrer, and complete volumetric titration cell.Coulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary.Recommended coulometry measuring range: 10 µg - 200 mg absolute waterThe 852 Titrando controls not only coulometric, but also volumetric Karl Fischer titration.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
- PCS
- 1
- 852 Titrando with generator electrode without diaphragm
- 2.852.0150
- Coulometer including generator electrode without diaphragm and complete volumetric titration cellCoulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary.Recommended coulometry measuring range: 10 µg - 200 mg absolute water.The 852 Titrando controls not only coulometric, but also volumetric Karl Fischer titration.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
- Coulometer including generator electrode without diaphragm and complete volumetric titration cellCoulometry is the ideal method for water content determination in liquids, solids, and gases when it comes to water content determination in the trace range (10 µg to 10 mg absolute water). In addition, coulometry is an absolute method and thus no titer determination is necessary.Recommended coulometry measuring range: 10 µg - 200 mg absolute water.The 852 Titrando controls not only coulometric, but also volumetric Karl Fischer titration.For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.
- PCS
- 1
- Sample rack, 36 x 6 mL, (Al)
- 6.2041.720
- Sample rack for 874 Oven Sample Processor, suitable for 36 sample vessels. The following sample vessels can be used: 6.2419.000.Material: Aluminum (AI)
- Sample rack for 874 Oven Sample Processor, suitable for 36 sample vessels. The following sample vessels can be used: 6.2419.000.Material: Aluminum (AI)
- PCS
- 1
- Sample rack, 25 x 2-30 mL, (Al)
- 6.2041.730
- Sample rack for 874 Oven Sample Processor, suitable for 25 sample vessels. The following sample vessels can be used: sample vessel (16 to 32.4 mm diameter).Material: Aluminum (Al)
- Sample rack for 874 Oven Sample Processor, suitable for 25 sample vessels. The following sample vessels can be used: sample vessel (16 to 32.4 mm diameter).Material: Aluminum (Al)
- PCS
- 1
- Needle holder with Luer lock
- 6.2049.040
- Needle holder (58 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.
- Needle holder (58 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.
- PCS
- 1
- Needle holder with Luer lock
- 6.2049.050
- Needle holder (73 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.
- Needle holder (73 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.
- PCS
- 1
- 807 Dosing Unit 2 mL
- 6.3032.120
- 807 Dosing Unit with integrated data chip with 2 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- 807 Dosing Unit with integrated data chip with 2 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- PCS
- 1
- 807 Dosing Unit 5 mL
- 6.3032.150
- 807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- 807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- PCS
- 1
- 807 Dosing Unit 10 mL
- 6.3032.210
- 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- PCS
- 1
- 807 Dosing Unit 20 mL
- 6.3032.220
- 807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- 807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- PCS
- 1
- 807 Dosing Unit 50 mL
- 6.3032.250
- 807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- 807 Dosing Unit with integrated data chip with 50 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
- PCS
- 1
- Measuring equipment for checking the temperature
- 6.5618.000
- Measuring equipment for checking the temperature of 774 Oven Sample Processor, 832, 860 Thermoprep.
- Measuring equipment for checking the temperature of 774 Oven Sample Processor, 832, 860 Thermoprep.
- PCS
- 1