FAQs – MagIC Net
General
Configuration/user management
FAQ
Can users be restricted for making changes, e.g., to methods, sample data, integration, etc.?// Configuration user management
FAQ
How do I use the "User administration"?// Configuration user management
FAQ
Is the "Audit Trail" always active?// Configuration user management
Database
FAQ
The integration is marked as "Manual" in the determination. How can I find out which peak was integrated manually?// Database
FAQ
What is a "batch"?// Database
FAQ
How can databases be backed up?// Database
FAQ
A standard for the calibration was recorded with the wrong sample type. What should I do?// Database
FAQ
How can I create a new calibration from already recorded standards in which the component assignment was not correct?// Database
FAQ
How can the entire calibration be transferred to all standards?// Database
FAQ
How is the raw data of a determination handled? Is it always available?// Database
FAQ
Which calibration option should I choose for "Reprocessing" of determinations?// Database
FAQ
Can an individual determination be exported?// Database
Method
FAQ
How do I use the example methods supplied with MagIC Net?// Method
FAQ
What does a "Method" contain?// Method
FAQ
Can I automate the injection of a check standard after a certain number of sample measurements (e.g., 10)?// Method
FAQ
How can I determine the reproducibility of a multiple injection?// Method
FAQ
What are subprograms?// Method
FAQ
How are the drift, noise, and, e.g., the current conductivity determined during a chromatogram?// Method
FAQ
Which types of subprograms are there?// Method
FAQ
How can I check my "Method"?// Method
FAQ
What are (logical) conditions?// Method
FAQ
What are "Common variables" and how are they used?// Method
FAQ
Can the recovery rate be calculated automatically with MagIC Net?// Method
Chromatography
FAQ
How can I check that my "Sample data" in a "Sample table" are complete?// Chromatography
FAQ
I have adjusted the method under "Reprocessing", but the next determinations are still being recorded with the old parameters.// Chromatography
FAQ
Can I inject samples from one sampler into two IC systems that are independent of one another?// Chromatography
FAQ
How do I make sure that my device is stopped at the end of a "Determination series"?// Chromatography
FAQ
How can I start a sample table automatically?// Chromatography
FAQ
How can I check that my "Sample data" is complete?// Chromatography