You have been redirected to your local version of the requested page
Request quote

The main sources of nickel pollution are electroplating, metallurgical operations, or leaching from pipes and fittings. Catalysts for the petroleum and chemical industries are major application fields for cobalt. In both cases, the metal is either released directly, or via the waste water-river pathway into the drinking water system. Therefore in the EU the legislation specifies 20 µg/L as the limit value for the Ni concentration in drinking water.

The simultaneous and straightforward determination of nickel and cobalt is based on adsorptive stripping voltammetry (AdSV). The unique properties of the non-toxic Bi drop electrode combined with AdSV results in an excellent performance in terms of sensitivity. The limit of detection for 30 s deposition time is approximately 0.2 µg/L for nickel and 0.1 µg/L for cobalt, and can be lowered further by increasing the deposition time. This method is best suited for automated systems or process analyzers, allowing fully automatic determination in large sample series.

Drinking water, mineral water, sea water

The water sample is pipetted into the measuring vessel. Ammonia / ammonium chloride buffer and the complexing agent dimethylglyoxime (DMG) are added, and the simultaneous determination of nickel and cobalt is carried out with a 884 Professional VA using the parameters specified in Table 1. The concentration is determined by two additions of a nickel and cobalt standard addition solution.

The Bi drop electrode is electrochemically activated prior to the first determination.

Figure 1. 884 Professional VA fully automated for VA analysis
Table 1. Parameters
Parameter Setting
Mode SQW – Square wave
Deposition potential -0.8 V
Deposition time 30 s
Start potential -0.8 V
End potential -1.3 V
Peak potential Ni -0.97 V
Peak potential Co -1.12 V
  • Working electrode: Bi drop
  • Reference electrode: Ag/AgCl/KCl (3 mol/L)
  • Auxiliary electrode: Glassy carbon rod

The method is suitable for the determination of nickel and cobalt concentrations in water samples from β(Ni2+) = 0.2–8 µg/L and β(Co2+) = 0.1–10 µg/L.

Figure 2. Determination of nickel and cobalt in tap water spiked with β(Ni) = 0.5 µg/L and β(Co) = 0.5 µg/L
Table 2. Result
Sample Ni (μg/L) Co (μg/L)
Tap water spiked with β(Ni) = 0.5 µg/L and β(Co) = 0.5 µg/L 0.58 0.54

Application Bulletin 440: Determination of nickel and cobalt in water samples by adsorptive stripping voltammetry with a Bi drop electrode

Contact

Metrohm India

Annai Indira Nagar, Thoraipakkam
600097 Chennai

Contact